Xcos demos fail!
Reported by Paul BIGNIER
On Windows 7 64bits, with a Scilab binary found on the following link, most Xcos demos fail:
http://downloadarea.scilab.org/index.php?wanted_date=2016-06-13&filter=binary
Here I'm going to list all errors found, with the first demo that provoked them (so I don't duplicate the same error reports).
Standard demos:
- Simple demo fails with a "cscope: Scilab is compiled without GUI, can not use Scope." error
- Bouncing balls launches but cannot be stopped (when I press Stop or close all windows, a process is still running, so I basically lost my Scilab)
- Scilab block shows a "Problem with port size" error and the diagram loads wrong: the link's control points are in the top-left corner instead of properly surrounding the block (I remember this was fixed in Linux...).
Control systems:
- Water tank shows an "Xcos error: Wrong value for field model.label : Valid C identifier expected." error
- Lorenz butterfly works but nothing happens when I press Stop, the simulation keeps going (same problem as Bouncing balls?)
Regards,
Paul